Production Change
As we finish up the last of the August batch of launchers a change is being made. Due to some recent problems with triggers, a change is recommended. In the past we recommended glueing the trigger. Long ago we used epoxy, then some time back we changed to CyanoAcrylate (CA or Krazy Glue). This glueing does not work consistently - sometimes it holds well, others not. Combined with occasional problems with the triggers, and the problems of getting the assembly apart when glued, leads us to this: We’re not going to glue the triggers on production launchers starting today, and at the moment we recommend against glueing them, at least initially. The alternative is to use teflon tape. This seals well, and leaves the trigger assembly serviceable. The downside is that the trigger can move around if forced. This is not a problem, though it can be annoying. If you find it annoying you can glue your trigger after your launcher has proven that it works well.
The September launcher batch will be slightly delayed while we get the last of the August batch out the door. So we are still accepting orders for the September batch.
We are presently low on barrel material, and until we have identified a new supply we have set barrel material to out of stock.